Electrochemical Reduction Of CO2 Research Articles

Superlative Porous Organic Polymers for Photochemical and Electrochemical CO2 Reduction Applications: From Synthesis to Functionality.

To mimic the carbon cycle at a kinetically rapid pace, the sustainable conversion of omnipresent CO2 to value-added chemical feedstock and hydrocarbon fuels implies a remarkable prototype for utilizing released CO2. Porous organic polymers (POPs) have been recognized as remarkable catalytic systems for achieving large-scale applicability in energy-driven processes. POPs offer mesoporous characteristics, higher surface area, and superior optoelectronic properties that lead to their relatively advanced activity and selectivity for CO2 conversion. In comparison to the metal organic frameworks, POPs exhibit an enhanced tendency toward membrane formation, which governs their excellent stability with regard to remarkable ultrathinness and tailored pore channels. The structural ascendancy of POPs can be effectively utilized to develop cost-effective catalytic supports for energy conversion processes to leapfrog over conventional noble metal catalysts that have nonlinear techno-economic equilibrium. Herein, we precisely surveyed the functionality of POPs from scratch, classified it, and provided a critical commentary of its current methodological advancements and photo/electrochemical achievements in the CO2 reduction reaction.

Synthesis of N‐propanol from CO2 Electroreduction on Bicontinuous Cu2O/Cu Nanodomains

n‐propanol is an important pharmaceutical and pesticide intermediate. To produce n‐propanol by electrochemical reduction of CO2 is a promising way, but is largely restricted by the very low selectivity and activity. How to promote the coupling of *C1 and *C2 intermediates to form the *C3 intermediate for n‐propanol formation is challenging. Here, we propose the construction of bicontinuous structure of Cu2O/Cu electrocatalyst, which consists of ultra‐small Cu2O nanodomains, Cu nanodomains and large amounts of grain boundaries between Cu2O and Cu nanodomains. The n‐propanol current density is as high as 101.6 mA cm−2 at the applied potential of −1.1 V vs. reversible hydrogen electrode in flow cell, with the Faradaic efficiency up to 12.1%. Moreover, the catalyst keeps relatively stable during electrochemical CO2 reduction process. Experimental studies and theoretical calculations reveal that the bicontinuous structure of Cu2O/Cu can facilitate the *CO formation, *CO‐*CO coupling and *CO‐*OCCO coupling for the final generation of n‐propanol.

Synthesis of N-propanol from CO2 Electroreduction on Bicontinuous Cu2O/Cu Nanodomains.

n-propanol is an important pharmaceutical and pesticide intermediate. To produce n-propanol by electrochemical reduction of CO2 is a promising way, but is largely restricted by the very low selectivity and activity. How to promote the coupling of *C1 and *C2 intermediates to form the *C3 intermediate for n-propanol formation is challenging. Here, we propose the construction of bicontinuous structure of Cu2O/Cu electrocatalyst, which consists of ultra-small Cu2O nanodomains, Cu nanodomains and large amounts of grain boundaries between Cu2O and Cu nanodomains. The n-propanol current density is as high as 101.6 mA cm-2 at the applied potential of -1.1 V vs. reversible hydrogen electrode in flow cell, with the Faradaic efficiency up to 12.1%. Moreover, the catalyst keeps relatively stable during electrochemical CO2 reduction process. Experimental studies and theoretical calculations reveal that the bicontinuous structure of Cu2O/Cu can facilitate the *CO formation, *CO-*CO coupling and *CO-*OCCO coupling for the final generation of n-propanol.

Electrochemical reduction of carbon dioxide based on surface modification of GCE by in situ electropolymerized xylenol orange and its composite with PtCo

Electrochemical reduction of carbon dioxide based on surface modification of GCE by in situ electropolymerized xylenol orange and its composite with PtCo

A combined density functional theory and microkinetics simulations study of electrochemical CO2 reduction on Cu8/SnO2(110): The crucial role of hydrogen coverage

The electrochemical reduction of CO2 (eCO2R) is a promising approach for converting CO2 into valuable chemicals and fuels using renewable energy sources. We investigated the mechanism of eCO2R for a small Cu8 cluster placed on SnO2 containing O vacancies using density functional theory and predicted current density and selectivity by microkinetics simulations within the computational hydrogen electrode model. Low and high H coverages were modeled by Cu8/SnO2-x and Cu8H6/SnO2-x models, using statistical methods to identify their most stable structures. Different CO2 adsorption modes on Cu8/SnO2-x and Cu8H6/SnO2-x surface models, all containing an O vacancy, resulted in distinct reaction pathways, leading to either HCOOH or CO. The preferred formation of HCOOH occurred upon CO2 adsorption on an O vacancy on the Cu8H6/SnO2-x surface, followed by sequential hydrogenation to HCOO and HCOOH. Adsorption of CO2 on Cu8/SnO2-x opened a facile pathway to CO. Electronic structure analysis revealed that differences in charge donation of Cu to the antibonding orbitals of CO2 can explain the predicted selectivity differences. The preferred adsorption mode of CO2 is bidentate at the Cu-SnO2-x interface. Our findings emphasize the role of H coverage on Cu on the selectivity of eCO2R for Cu/SnOx catalysts.

Switching CO2 Electroreduction toward Ethanol by Delocalization State-Tuned Bond Cleavage.

The electrochemical CO2 reduction reaction by copper-based catalysts features a promising approach to generate value-added multicarbon (C2+) products. However, due to the unfavored formation of oxygenate intermediates on the catalyst surface, the selectivity of C2+ alcohols like ethanol remains unsatisfactory compared to that of ethylene. The bifurcation point (i.e., the CH2═CHO* intermediate adsorbed on Cu via a Cu-O-C linkage) is critical to the C2+ product selectivity, whereas the subsequent cleavage of the Cu-O or the O-C bond determines the ethanol or ethylene pathway. Inspired by the hard-soft acid-base theory, in this work, we demonstrate an electron delocalization tuning strategy of the Cu catalyst by a nitrene surface functionalization approach, which allows weakening and cleaving of the Cu-O bond of the adsorbed CH2═CHO*, as well as accelerating hydrogenation of the C═C bond along the ethanol pathway. As a result, the nitrene-functionalized Cu catalyst exhibited a much-enhanced ethanol Faradaic efficiency of 45% with a peak partial current density of 406 mA·cm-2, substantially exceeding that of unmodified Cu or amide-functionalized Cu. When assembled in a membrane electrode assembly electrolyzer, the catalyst presented a stable CO2-to-ethanol conversion for >300 h at an industrial current density of 400 mA·cm-2.

In situ spectroelectrochemical study of acetate formation by CO2 reduction using Bi catalyst in amine-based capture solution.

Carbon capture and utilization (CCU) are technologies sought to reduce the level of CO2 in the atmosphere. Industrial carbon capture is associated with energetic penalty, thus there is an opportunity to research alternatives. In this work, spectroelectrochemistry was used to analyze the electrochemical CO2 reduction (eCO2R) in CO2 saturated monoethanolamine (MEA)-based capture solutions, in a novel CCU process. The in situ Fourier transform infrared (FTIR) spectroscopy experiments show that at the Bi catalyst, the active species involved in the eCO2R is the dissolved CO2 in solution, and not carbamate. In addition, the products of eCO2R were evaluated under flow, using commercial Bi2O3 NP as catalyst. Formate and acetate were detected, with normalized FE for acetate up to 14.5%, a remarkable result, considering the catalyst used. Acetate is formed either in the presence of cetrimonium bromide (CTAB) as surfactant or at higher current density (> -100 mA cm-2) and the results enabled the proposition of a pathway for its production. This work sheds light on the complex reaction environment of a capture medium electrolyte and is thus relevant for an improved understanding of the conversion of CO2 into value-added products and to evaluate the feasibility of a combined CCU approach.

Boosting Electrochemical CO2 Reduction to CO by Regulating the Porous Structure of Carbon Membrane.

Ni single-atom-decorated nitrogen-doped carbon materials (Ni-Nx-C) have demonstrated high efficiency in the electrochemical reduction of CO2 (CO2RR) to CO. In this study, Ni-Nx-C active sites were embedded within a carbon membrane via an electrospinning and pyrolysis process. The resulting self-supported carbon membrane hosting Ni-Nx-C sites could be directly utilized as an electrode for the CO2RR. To enhance the CO2RR performance of the carbon membrane, the porous structure of the carbon membrane was fine-tuned by incorporating a pore-forming agent. The optimized porous carbon membrane electrode, K0.66-Ni-NC, achieved an impressive CO faradaic efficiency (FECO) of over 90% within a wide potential range from -0.8 to -1.6 V vs RHE for CO2RR. Additionally, it maintained an FECO of above 90% at -0.8 V vs RHE throughout a 30 h durability test in an H-cell. Further analysis has revealed that the porous structure of the carbon membrane not only facilitates the mass transport of CO2 but also increases the level of exposure of active sites during the CO2RR.

Metal-free N–S co-doped electrode for electrochemical CO2 reduction to HCOOH

Metal-free N–S co-doped electrode for electrochemical CO2 reduction to HCOOH

Entropy Drives Accelerated Ion Diffusion upon Carbon Dioxide Expansion of Electrolytes.

Carbon dioxide-expanded liquids, organic solvents with high concentrations of soluble carbon dioxide (CO2) at mild pressures, have gained attention as green catalytic media due to their improved properties over traditional solvents. More recently, carbon dioxide-expanded electrolytes (CXEs) have demonstrated improved reaction rates in the electrochemical reduction of CO2, by increasing the rate of delivery of CO2 to the electrode while maintaining facile charge transport. However, recent studies indicate that the limiting behavior of CXEs at higher CO2 pressures is a decline in solution conductivity due to reduced polarity, leading to poorer charge screening and greater ion pairing. In this article, we employ molecular dynamics simulations to investigate the energetic driving forces behind the diffusive properties of an acetonitrile and tetrapropylammonium hexafluorophosphate (TPrAPF6) CXE with increasing CO2 concentration. Our results indicate that entropy drives solvent and electrolyte diffusion with increasing CO2 pressure. The activation energy of ion diffusion increases with higher concentrations of CO2, indicating that increasing the temperature may improve solution conductivity in these systems. This trend in the activation energies is traced to stronger cation-anion Coulombic interactions due to weaker solvent screening at high CO2 concentrations, suggesting that the choice of ion may provide a route to diminish this effect.

Seeding Atomic Silver into Internal Lattice Sites of Transition Metal Oxide for Advanced Electrocatalysis.

Transition metal oxides (TMOs) are widely studied for loading of various catalysts due to their low cost and high structure flexibility. However, the prevailing close-packed nature of most TMOs crystals has restricted the available loading sites to surface only, while their internal bulk lattice remains unactuated due to the inaccessible narrow space that blocks out most key reactants and/or particulate catalysts. Herein, using tunnel-structured MnO2, this study demonstrates how TMO's internal lattice space can be activated as extra loading sites for atomic Ag in addition to the conventional surface-only loading, via which a dual-form Ag catalyst within MnO2 skeleton is established. In this design, not only faceted Ag nanoparticles are confined onto MnO2 surface by coherent lattice-sharing, Ag atomic strings are also seeded deep into the sub-nanoscale MnO2 tunnel lattice, enriching the catalytically active sites. Tested for electrochemical CO2 reduction reaction (eCO2RR), such dual-form catalyst exhibits a high Faradaic efficiency (94%), yield (67.3mol g-1 h-1) and durability (≈48h) for CO production, exceeding commercial Ag nanoparticles and most Ag-based electrocatalysts. Theoretical calculations further reveal the concurrent effect of such dual-form catalyst featuring facet-dependent eCO2RR for Ag nanoparticles and lattice-confined eCO2RR for Ag atomic strings, inspiring the future design of catalyst-substrate configuration.

Active Oxygenated Structure‐Intensified CO2 Capture Enables Efficient Electrochemical Ethylene Production Over Carbon Nanofibers

The pursuit of high efficacy C–C coupling during the electrochemical CO2 reduction reaction remains a tremendous challenge owing to the high energy barrier of CO2 activation and insufficient coverage of the desired intermediates on catalytic sites. Inspired by the concept of capture‐coupled CO2 activation, we fabricated quinone‐grafted carbon nanofibers via an in situ oxidative carbonylation strategy. The quinone functionality of carbon nanofibers promotes the capture of CO2 followed by activation. At a current density of 400 mA cm‐2, the Faradaic efficiency of ethylene reached 62.9%, and a partial current density of 295 mA cm‐2 was achieved on the quinone‐rich carbon nanofibers. The results of in situ spectroscopy and theoretical calculations indicated that the remarkable selectivity enhancement in ethylene originates from the quinone structure, rather than the electronic properties of Cu particles. The interaction of quinone with CO2 increases the local *CO coverage and simultaneously hinders the co‐adsorption of *H on Cu sites, which greatly reduces the energy barrier for C–C coupling and restrains subsequent *CO protonation. The modulation strategy involving specific oxygenated structure, as an independent degree of freedom, guides the design of functionalized carbon materials for tailoring the selectivity of desired products during the CO2 capture and reduction.

Active Oxygenated Structure-Intensified CO2 Capture Enables Efficient Electrochemical Ethylene Production Over Carbon Nanofibers.

The pursuit of high efficacy C-C coupling during the electrochemical CO2 reduction reaction remains a tremendous challenge owing to the high energy barrier of CO2 activation and insufficient coverage of the desired intermediates on catalytic sites. Inspired by the concept of capture-coupled CO2 activation, we fabricated quinone-grafted carbon nanofibers via an in situ oxidative carbonylation strategy. The quinone functionality of carbon nanofibers promotes the capture of CO2 followed by activation. At a current density of 400 mA cm-2, the Faradaic efficiency of ethylene reached 62.9%, and a partial current density of 295 mA cm-2 was achieved on the quinone-rich carbon nanofibers. The results of in situ spectroscopy and theoretical calculations indicated that the remarkable selectivity enhancement in ethylene originates from the quinone structure, rather than the electronic properties of Cu particles. The interaction of quinone with CO2 increases the local *CO coverage and simultaneously hinders the co-adsorption of *H on Cu sites, which greatly reduces the energy barrier for C-C coupling and restrains subsequent *CO protonation. The modulation strategy involving specific oxygenated structure, as an independent degree of freedom, guides the design of functionalized carbon materials for tailoring the selectivity of desired products during the CO2 capture and reduction.

Facile Preparation of Stable NiII‐ and CoII‐tetraaminophthalocyanine Electropolymers for Highly Efficient Heterogeneous Carbon Dioxide Reduction

This study focused on preparation of stable polymer films of NiII‐ and CoII‐tetraaminophthalocyanines, p‐NiTAPc and p‐CoTAPc, respectively, for highly efficient heterogeneous electrochemical carbon dioxide (CO2) reduction in a flow electrolysis cell. Major development represented in this work was fabrication of p‐NiTAPc and p‐CoTAPc films via electropolymerization of their corresponding monomers on carbon‐based substrates without using binder or conducting additive materials to obtain efficient gas diffusion electrodes (GDEs) for scalable, productive and selective CO2‐to‐CO conversion. The target polymers were characterized by UV‐visible spectrophotometry, attenuated total reflection‐Fourier transform infrared spectroscopy, scanning electron microscopy, energy dispersive X‐ray spectroscopy and cyclic voltammetry. According to controlled potential electrolysis and gas chromatography, p‐NiTAPc‐catalyzed CO2 reduction at –0.99V vs. reversible hydrogen electrode (RHE) gave 953 mL of CO in a period of 16 hours with current density and Faradaic efficiency (FE) of 109±1 mA·cm‐2 and 99±2%, respectively. A p‐CoTAPc‐modified GDE exhibited superior catalytic performance to the case of p‐NiTAPc in terms of catalyst stability and CO productivity by performing the continuous CO2 reduction at the potential of –1.10 V vs. RHE for up to 41 hours and affording almost 3 times higher amount of CO with the current density of 161±5 mA/cm2 and 95±2% FE.

La-based Transition Metal Oxide Perovskites as Electrocatalysts for Electrochemical Carbon Dioxide Reduction

We report here the feasibility of using LaTMO3-based perovskites (TM = Co, Cr, Fe, Mn, Ni, i.e., non-Cu 3d transition metals) as electrocatalysts for electrochemical CO2 reduction reaction (eCO2RR). Phase pure LaTMO3 perovskites, having TM-ions in multiple oxidation states for all and O-defects for LaFeO3 and LaNiO3, have been synthesized and tested as electrocatalysts for eCO2RR in flow cell type set-up. The above characteristics of the La-TM-oxides have been found to influence the current densities during eCO2RR at the various applied potentials, with favorable effects of the presence of O-defects (as for LaFeO3 and LaNiO3). Upon eCO2RR, both C1 and C2 liquid products have been obtained, including ethanol, with a partial current density of −2.66 mA cm−2 at −1.2 V vs RHE (for LaFeO3). The types of products and the faradic efficiencies have been found to depend on the TM-ion present (in the LaTMO3); in particular, the oxidation state(s), associated O-defect(s) and electronic conductivity. Furthermore, the electrocatalysts have been found to be stable during eCO2RR. Overall, the present work highlights the potential of La-TM-oxide perovskites for usage as stable electrocatalysts for eCO2RR, and also provides insights into the proper selection of “TM” and reaction conditions for obtaining the desired product(s).

NHC-CDI Ligands Boost Multicarbon Production in Electrocatalytic CO2 Reduction by Increasing Accumulated Charged Intermediates and Promoting *CO Dimerization on Cu.

Copper-based materials exhibit significant potential as catalysts for electrochemical CO2 reduction, owing to their capacity to generate multicarbon hydrocarbons. The molecular functionalization of Cu electrodes represents a simple yet powerful strategy for improving the intrinsic activity of these materials by favoring specific reaction pathways through the creation of tailored microenvironments around the surface active sites. However, despite its success, comprehensive mechanistic insights derived from experimental techniques are often limited, leaving the active role of surface modifiers inconclusive. In this work, we show that N-heterocyclic carbene-carbodiimide-functionalized Cu catalysts display a remarkable activity for multicarbon product formation, surpassing bare Cu electrodes by more than an order of magnitude. These hybrid catalysts operate efficiently using an electrolyzer equipped with a gas diffusion electrode, achieving a multicarbon product selectivity of 58% with a partial current density of ca. -80 mA cm-2. We found that the activity for multicarbon product formation is closely linked to the surface charge that accumulates during electrocatalysis, stemming from surface intermediate buildup. Through X-ray photoelectron spectroscopy, we elucidated the role of the molecular additives in altering the electronic structure of the Cu electrodes, promoting the stabilization of surface CO. Additionally, in situ Raman measurements established the identity of the reaction intermediates that accumulate during electrocatalysis, indicating preferential CO binding on Cu step sites, known for facilitating C-C coupling. This study underscores the significant potential of molecular surface modifications in developing efficient electrocatalysts for CO2 reduction, highlighting surface charge as a pivotal descriptor of multicarbon product activity.

CO Intermediate‐Assisted Dynamic Cu Sintering During Electrocatalytic CO2 Reduction on Cu−N−C Catalysts

AbstractThe electrochemical CO2 reduction reaction (eCO2RR) to multicarbon products has been widely recognized for Cu‐based catalysts. However, the structural changes in Cu‐based catalysts during the eCO2RR pose challenges to achieving an in‐depth understanding of the structure–activity relationship, thereby limiting catalyst development. Herein, we employ constant‐potential density functional theory calculations to investigate the sintering process of Cu single atoms of Cu−N−C single‐atom catalysts into clusters under eCO2RR conditions. Systematic constant‐potential ab initio molecular dynamics simulations revealed that the leaching of Cu−(CO)x moieties and subsequent agglomeration into clusters can be facilitated by synergistic adsorption of H and eCO2RR intermediates (e.g., CO). Increasing the Cu2+ concentration or the applied potential can efficiently suppress Cu sintering. Both microkinetic simulations and experimental results further confirm that sintered Cu clusters play a crucial role in generating C2 products. These findings provide significant insights into the dynamic evolution of Cu‐based catalysts and the origin of their activity toward C2 products during the eCO2RR.

[2+1] Cycloadditions Modulate the Hydrophobicity of Ni-N4 Single-Atom Catalysts for Efficient CO2 Electroreduction.

Microenvironment regulation of M-N4 single-atom catalysts (SACs) is a promising way to tune their catalytic properties toward the electrochemical CO2 reduction reaction. However, strategies that can effectively introduce functional groups around the M-N4 sites through strong covalent bonding and under mild reaction conditions are highly desired. Taking the hydrophilic Ni-N4 SAC as a representative, we report herein a [2+1] cycloaddition reaction between Ni-N4 and in-situ generated difluorocarbene (F2C:), and enable the surface fluorocarbonation of Ni-N4, resulting in the formation of a super-hydrophobic Ni-N4-CF2 catalyst. Meanwhile, the mild reaction conditions allow Ni-N4-CF2 to inherit both the electronic and structural configuration of the Ni-N4 sites from Ni-N4. Enhanced electrochemical CO2-to-CO Faradaic efficiency above 98% is achieved in a wide operating potential window from -0.7 V to -1.3 V over Ni-N4-CF2. In-situ spectroelectrochemical studies reveal that a highly hydrophobic microenvironment formed by the -CF2- group repels asymmetric H-bonded water at the electrified interface, inhibiting the hydrogen evolution reaction and promoting CO production. This work highlights the advantages of [2+1] cycloaddition reactions on the covalent modification of N-doped carbon-supported catalysts.

[2+1] Cycloadditions Modulate the Hydrophobicity of Ni‐N4 Single‐Atom Catalysts for Efficient CO2 Electroreduction

Microenvironment regulation of M‐N4 single‐atom catalysts (SACs) is a promising way to tune their catalytic properties toward the electrochemical CO2 reduction reaction. However, strategies that can effectively introduce functional groups around the M‐N4 sites through strong covalent bonding and under mild reaction conditions are highly desired. Taking the hydrophilic Ni‐N4 SAC as a representative, we report herein a [2+1] cycloaddition reaction between Ni‐N4 and in‐situ generated difluorocarbene (F2C:), and enable the surface fluorocarbonation of Ni‐N4, resulting in the formation of a super‐hydrophobic Ni‐N4‐CF2 catalyst. Meanwhile, the mild reaction conditions allow Ni‐N4‐CF2 to inherit both the electronic and structural configuration of the Ni‐N4 sites from Ni‐N4. Enhanced electrochemical CO2‐to‐CO Faradaic efficiency above 98% is achieved in a wide operating potential window from −0.7 V to −1.3 V over Ni‐N4‐CF2. In‐situ spectroelectrochemical studies reveal that a highly hydrophobic microenvironment formed by the −CF2− group repels asymmetric H‐bonded water at the electrified interface, inhibiting the hydrogen evolution reaction and promoting CO production. This work highlights the advantages of [2+1] cycloaddition reactions on the covalent modification of N‐doped carbon‐supported catalysts.

CAIMD Simulations Guided Design of Atomic Praseodymium Doping In–Bi Nanofibers for High‐Energy‐Efficiency CO2 Electrolysis to Formate in Ultra‐Wide Potential Window

AbstractThe electrochemical CO2 reduction reaction (ECO2RR) has emerged as a promising technology for achieving carbon neutralization. Even though considerable efforts are dedicated to gain deep insight into the understanding of ECO2RR on a mechanism level through density functional theory (DFT) studies, effects of solvent molecules and temperature have long been neglected by conventional DFT calculations as a consequence of limitations in current technologies and computational power of supercomputers. Under this context, the lack of comprehensive understanding over the energy changes in the reaction derived from the only concern on free energy changes between reaction intermediates have arouse an urgent call for exploring feasible calculation options toward generalized theoretical study. Here, a systematic mechanism study is provided toward ECO2RR via constrained ab initio molecular dynamics (cAIMD) simulations, in which the effects of solvent water molecules and temperature are taken into consideration to guide the synthesis of single‐atom alloy (SAA) catalyst. Consequently, the resultant Pr0.05/InBi achieves a maximum Faradic efficiency (FE) of 96.4% and an energy efficacy (EE) of 59.41% for formate. This work offers a novel approach to the design and screening of SAA catalysts, presenting foreseeable future in accelerating the industrial application process of ECO2RR.